Cubinder's net

Discussion of shapes with curves and holes in various dimensions.

Re: Cubinder's net

Postby icebreaker » Mon Jun 11, 2018 2:09 pm

It's more accurate. I probably will add these animations to the Wiki.

P.S. Some men told me that they don't understand what are those red lines. I suppose it's obviously for me only that these are the same torus that is included in this tiger. Tiger in these three animations is the same, but it's rotated at different angles.
Attachments
Tiger_c-sv2_1.gif
Tiger_c-sv2_1.gif (171.16 KiB) Viewed 411 times
Tiger_c-sv2_2.gif
Tiger_c-sv2_2.gif (193.77 KiB) Viewed 410 times
Tiger_c-sv2_3.gif
Tiger_c-sv2_3.gif (185.66 KiB) Viewed 400 times
Last edited by icebreaker on Sat Jun 30, 2018 5:36 pm, edited 1 time in total.
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Tue Jun 12, 2018 9:27 am

And now I need to know how to make those http://hi.gher.space/dl/EEWRMK20J64PJM8K47DT05W9V1.png cross-sections using a parametric surface (that consist of X equation, Y equation and Z equation with u, v parameters)
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Thu Jun 14, 2018 5:20 pm

I made the third variant of cross-sections and net of a cubinder. Is it more felicitous than previous ones?

P.S. According to some people, I understood that these net and cross-sections are not clear and obvious for beginners. The first variant of these ones (with red and blue lines only) they liked more. I think that I should make one more variant.
Attachments
Cubinder_net_v3.png
Cubinder_net_v3.png (31.66 KiB) Viewed 367 times
Cubinder_c-sv3_round_cell-first.gif
Cubinder_c-sv3_round_cell-first.gif (98.98 KiB) Viewed 367 times
Cubinder_c-sv3_cylinder-first.gif
Cubinder_c-sv3_cylinder-first.gif (7.74 KiB) Viewed 367 times
Cubinder_c-sv3_disk-first.gif
Cubinder_c-sv3_disk-first.gif (55.85 KiB) Viewed 367 times
Cubinder_c-sv3_round_face-first.gif
Cubinder_c-sv3_round_face-first.gif (44.75 KiB) Viewed 367 times
Cubinder_c-sv3_edge-first.gif
Cubinder_c-sv3_edge-first.gif (35.59 KiB) Viewed 367 times
Last edited by icebreaker on Sat Jun 30, 2018 5:55 pm, edited 1 time in total.
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Wed Jun 20, 2018 1:19 pm

Spherinder.
Attachments
Spherinder_c-s_round_cell-first.gif
Spherinder_c-s_round_cell-first.gif (77.76 KiB) Viewed 335 times
Spherinder_c-s_sphere-first.gif
Spherinder_c-s_sphere-first.gif (6.59 KiB) Viewed 335 times
Spherinder_c-s_face-first.gif
Spherinder_c-s_face-first.gif (36.25 KiB) Viewed 335 times
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Thu Jun 21, 2018 4:32 pm

New colored version of duocylinder.
Attachments
Duocylinder_c-sv3_red-first.gif
Duocylinder_c-sv3_red-first.gif (129.62 KiB) Viewed 318 times
Duocylinder_c-sv3_blue-first.gif
Duocylinder_c-sv3_blue-first.gif (197.09 KiB) Viewed 318 times
Duocylinder_c-sv3_round_face-first.gif
Duocylinder_c-sv3_round_face-first.gif (80.38 KiB) Viewed 318 times
Duocylinder_net_v2_1.png
Duocylinder_net_v2_1.png (48.75 KiB) Viewed 265 times
Duocylinder_net_v2_2.png
Duocylinder_net_v2_2.png (46.92 KiB) Viewed 265 times
Last edited by icebreaker on Wed Jun 27, 2018 6:55 am, edited 1 time in total.
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Mon Jun 25, 2018 1:11 pm

Slices of a spheritorus. Сompare these ones with the cross-sections of a tiger.

P.S. The red lines on these animations are the same sphere that is included in the same spheritorus which is rotated at different angles.
Attachments
Spheritorus_c-s_1.gif
Spheritorus_c-s_1.gif (48.33 KiB) Viewed 287 times
Spheritorus_c-s_2.gif
Spheritorus_c-s_2.gif (169.19 KiB) Viewed 287 times
Spheritorus_c-s_3.gif
Spheritorus_c-s_3.gif (62.48 KiB) Viewed 287 times
Last edited by icebreaker on Sat Jun 30, 2018 5:58 pm, edited 1 time in total.
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Tue Jun 26, 2018 3:11 pm

Cross-sections of a torisphere.

P.S. The red lines are the same torus that is included in this torisphere.
Attachments
Torisphere_c-s_1.gif
Torisphere_c-s_1.gif (143.51 KiB) Viewed 276 times
Torisphere_c-s_2.gif
Torisphere_c-s_2.gif (94.74 KiB) Viewed 276 times
Torisphere_c-s_3.gif
Torisphere_c-s_3.gif (236.32 KiB) Viewed 276 times
Last edited by icebreaker on Sat Jun 30, 2018 5:59 pm, edited 1 time in total.
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Re: Cubinder's net

Postby icebreaker » Wed Jun 27, 2018 3:34 pm

Slices of a ditorus.

P.S. I think it's clear that the red lines are the same torus that is included in this ditorus.
Attachments
Ditorus_c-s_1.gif
Ditorus_c-s_1.gif (50.31 KiB) Viewed 262 times
Ditorus_c-s_2.gif
Ditorus_c-s_2.gif (49.71 KiB) Viewed 262 times
Ditorus_c-s_3.gif
Ditorus_c-s_3.gif (127.34 KiB) Viewed 262 times
Ditorus_c-s_4.gif
Ditorus_c-s_4.gif (184.87 KiB) Viewed 262 times
icebreaker
Dionian
 
Posts: 53
Joined: Thu Sep 14, 2017 8:07 am
Location: Omsk, Russian Federation (UTC+6)

Previous

Return to Toratopes

Who is online

Users browsing this forum: No registered users and 1 guest